Table of Contents
Advertisement
OSPF Auth Key
When configured, this parameter allows an authentication procedure to be
executed on the OSPF header. If the 64-bit (8 character) password does not
correspond, the packet is thrown away.
Values: 64 bits (8 characters)
Default: 8 spaces (no authentication)
Static Route Table Screen
Under some circumstances, it may not be necessary for a router to learn a
route using ordinary means such as RIP or OSPF. It is possible under these
circumstances for you to add a route to the route table of a router. The Static
Route menus are always associated with a circuit.
Figure 4.49
The fields on this screen are described below.
Field
Endpoint
Target IP Address Represents the target network that you want this router to reach.
Target IP Mask
Next Hop
Cost
Rte Stat
Routes Details Screen
This screen displays the details associated with a specific route.
Static Route Table Screen
Description
Endpoint name (or interface) through which to send the IP packet
to reach the Target IP Address.
Mask of the target network.
IP address of the next device in the route.
Cost of using that route.
Indicates whether or not a route is enabled or disabled.
V T 1 0 0 I n t e r f a c e
4-59
Advertisement
Table of Contents
