Table of Contents
Advertisement
IP Address
NAT IP Address
Processed Packets
Global Port
Server Port
4-74
W A N s u i t e 5 2 6 0 / 5 2 3 0
Figure 4.67
NAT Port Status Screen
Original IP Address of the host.
Translated IP Address of the host.
Number of packets processed by NAT for this address.
Static UDP Trans Table Screen
The Static UDP Trans Table screen (Figure 4.68) allows static mapping of
global UDP Server ports to a local host IP address/port combination. The
parameters described below enable access to UDP Servers on the private/
corporate network "behind the NAT." The parameters may be used only when
in NAPT mode.
Figure 4.68
Static UDP Translation Table Screen
Decimal IP Port exposed to the global Internet. Default is 0.
Decimal IP Port of the local UDP Server. This port is usually the same as the
Global Port. Default is 0.
Advertisement
Table of Contents
