Verilink WANsuite 5260 Reference Manual page 41

Wansuite 5260; wansuite 5230
Table of Contents

Advertisement

Mode
Packet Rate
Bundling
Start Channel
Number of Channels
NOTICE:
V.35 requires the use of an optional cable. Refer to Optional Equipment
on page A-6 for ordering information.
By default, the Serial port serves as a DCE port in both Packet and TDM
modes. However, the Serial port can serve as a DTE port when the unit is in
Packet mode.
If the Serial port connects to a DTE device (such as a FRAD or a router), the
Mode parameter must be set to "DCE." If this port connects to a DCE device
(such as a DSU/CSU), this parameter must be set to "DTE" (valid only for
Packet mode, not TDM).
Values: DCE, DTE
Default: DCE
NOTICE:
DTE mode requires the use of an optional DTE cable. Refer to
Appendix A for ordering information.
If the port is running in Packet mode, the Rate must be configured to the
desired port speed (in bits per second). In TDM mode, the port speed rate will
be set by configuring the next four parameters (Start Channel, Number of
Channels, Bundling, and Channel Rate).
Values: Nx56K; Nx64K where N = 1−32
Default: 1984 kbps
Selects whether the DTE channel assignment is made as a "Contiguous"
group or as "Alternate" channels. Selecting "Alternate" ensures ones density.
Because the unit allows individual channels to be configured for a service, a
value of "Arbitrary" will be returned for this parameter if the current channel
allocation is not contiguous or Alternate. The "Arbitrary" value can only be
supplied by the unit − it cannot be set by the user.
Values: Contiguous, Alternate, Arbitrary
Default: Contiguous
NOTICE:
Because "Alternate" Bundling assigns every other channel, only half
the channels are available.
Selects the starting channel in the 31-channel DS1 bit stream. Starting with
the specified channel, the unit automatically assigns the channels that follow.
Unframed
Values
Default
Specifies the number of channels to be assigned to the DTE.
Unframed
Values
0 or 32
Default
CCS
0
1−31
0
1
CCS
0−31
0
31
CAS
1−15, 17−31
1
CAS
0-30
30
W e b S e r v e r I n t e r f a c e
3-11

Advertisement

Table of Contents
loading

Related Products for Verilink WANsuite 5260

This manual is also suitable for:

Wansuite 5230

Table of Contents