Table of Contents
Advertisement
Figure 4.14
The Service Table screen displays the available services listed by Index
number. From this screen, you can navigate to a Service Details screen
(Figure 4.15) from the <Index> column, to an Interface Details screen from
the <Interface> column, or to a Type Details screen from the <Type> column.
To add a service, select the "Add Service" prompt at the top of the screen.
Figure 4.15
From this screen, you can access and change the parameters listed below. The
new parameters are saved when you press the "Esc" key and return to the
previous screen.
Interface
Selecting one of the interfaces will bring up a screen where you can view
interface parameters. These screens are the same ones displayed when you
select a sub-menu from the Interfaces screen described earlier on page 4-6.
NOTICE:
Service Table Screen
Service Details Screen
One of the Interface options is "Virtual."
be attached to the Virtual interface. You would choose the Virtual interface for
PPP if you elected to run PPP over Frame Relay. When you attach PPP to the
PPP is the only service that may
V T 1 0 0 I n t e r f a c e
4-19
Advertisement
Table of Contents
