Table Of Contact Id Event Codes - ADEMCO Vista-10SEa Installation And Setup Manual

VISTA-10SEa Installation and Setup Guide
ADEMCO Contact ID Reporting takes the following format:
Code Definition
110 Fire Alarm
121 Duress
122 Alarm, 24-hour Silent
123 Alarm, 24-hour Audible Panic
131 Alarm, Perimeter, Burg.
132 Alarm, Interior, Burg.
134 Alarm, Entry/Exit, Burg.
135 Alarm, Day/Night, Burg.
150 Alarm, 24-Hour Auxiliary
301 AC (Mains) Power Loss
302 Low System Battery/Battery Test Fail
321 Siren Supervision Failure
333 Expansion Module Fail
344 Trouble, RF Receiver Jam
353 Trouble Alternative Communications
Media
13-2
CCCC Q EEE GG ZZZ
where: CCCC = Customer (subscriber) ID
Q = Event qualifier, where:
E = new event and R = restore
EEE = Event code (3 hexadecimal digits)
NOTE : For a complete list of event codes, refer to the
GG = Always 00.
ZZZ = Zone/Contact ID number reporting the Alarm, or user
number for Open/Close reports. System status
messages (AC Loss, Walk Test, etc.) contain zeroes in
the ZZZ location.

Table of Contact ID Event Codes

Code Definition
373 Fire Loop Trouble
380 Trouble (Global)
383 RF Sensor Tamper
384 RF Sensor Low Battery
401 O/C by User
406 Cancel by User
407 Remote Arm/Disarm (Download)
408 Quick Arm
441
Armed
570 Bypass
601 Test, Manually Triggered
602 Periodic Test
606 AAV to follow
616 Service Request
central office receiver manual.
AWAY/MAX
, Quick-Arm
STAY/INSTANT STAY/INSTANT