Table Of Contact Id Event Codes; Communication Programming - ADEMCO VISTA-10SE Installation Instructions Manual

Code Definition
110 Fire Alarm
121 Duress
122 Alarm, 24-hour Silent
123 Alarm, 24-hour Audible Panic
131 Alarm, Perimeter, Burg.
132 Alarm, Interior, Burg.
134 Alarm, Entry/Exit, Burg.
135 Alarm, Day/Night, Burg.
150 Alarm, 24 Hour Auxiliary
301 AC Power
302 Low System Battery/Battery Test Fail
333 Expansion Module Fail
353 Long Range Radio Trouble
373 Fire Loop Trouble

Communication Programming

Introduction
This section provides instructions for programming those fields that affect communications
between the control and the central station.
Programming Procedure
Fields 40, 41, 42:
Enter up to the number
of digits shown. Do not
fill unused spaces.
Enter 0–9,
# + 11 for ' '
# + 12 for '#'
# + 13 for a pause
(2 secs)
Field 43 is also
used as the Long
Range Radio
Subscriber Account
Number
www.PDF-Zoo.com

TABLE OF CONTACT ID EVENT CODES

Code
374
380
383
384
401
406
407
408
441
570
601
602
606
1. With at least one Alpha keypad (5137AD or 6139) connected to the
system, power up the system. If necessary, refer to the FINAL POWER
UP section for the power-up procedure. If you had previously connected
the AC transformer to the control panel, you need only plug in the
transformer (to 120VAC outlet) to power up the system.
2. Enter the programming mode by keying the following on the Alpha
keypad: Installer code (4 1 1 1) + 8 + 0.
Press 40 PABX ACCESS CODE
Enter up to 4 digits if PABX is needed to access an outside line. If fewer than
4 digits are needed to be entered, exit by pressing [ ] and next field number
(e.g., 41). To clear entries from field, press 40 .
Press 41 PRIMARY PHONE No .
Enter up to 12 digits. If fewer than 12 digits entered, exit by pressing [ ] and
next field number (e.g., 42). To clear entries from field, press 41
Press 42 SECONDARY PHONE No.
Enter up to 12 digits. If fewer than 12 digits entered, exit by pressing [ ] and
next field number (e.g., 43). To clear entries from field, press 42
the Paging feature, enter the pager number as the secondary phone
number.
Press 43 SUBSCRIBER ACCOUNT. No.
Central Station Account Number).
Enter 0–9; # + 11 for B; # + 12 for C; # + 13 for D; # + 14 for E; # + 15 for F
(default).
Enter as the fourth digit if a 3-digit account number (for 3+1 dialer reporting
format) is used. Enter 0 as the first digit of a 4-digit account number for Nos.
0000–0999. End field by pressing
See the blank Programming Form in the separate Programming Guide for
examples of Account No. entries.
– 66 –
firealarmresources.com
Definition
Exit Error Alarm
Trouble (Global)
RF Sensor Tamper
RF Sensor Low Battery
O/C by User
Cancel by User
Remote Arm/Disarm (Download)
Quick Arm AWAY/MAX
Armed STAY/INSTANT, Quick Arm
STAY/INSTANT
Bypass
Test, Manually Triggered
Periodic Test
AAV to follow
(and press next field).
.
. If using