List Of Figures; How To Use This Manual - ADEMCO Vista-10SEa Installation And Setup Manual

VISTA-10SEa Installation and Setup Guide

List of Figures

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Figure 2-1. Installing the Cabinet Lock ........................................................................................................2-1
Figure 2-2. Installing the PC Board Alone or (if used) with a 4204............................................................2-2
Figure 2-3. Installing the PC Board & RF Receiver (if used) Together in the Cabinet .............................2-3
Figure 2-4. Standard Telephone Line Connections......................................................................................2-4
Figure 3-1. Keypad Connections to the Control Board ................................................................................3-2
Figure 3-2. Using a Supplementary Power Supply for Keypads.................................................................3-3
Figure 4-1. 4-Wire Smoke Detector Connections to Zone 5 .........................................................................4-2
Figure 5-1. Wiring Connections, 4219 & 4229 (4229 shown).......................................................................5-2
Figure 6-1. 5881 Wireless Receivers (cover removed)..................................................................................6-3
Figure 7-1. 4204 Connections to Control ......................................................................................................7-2
Figure 7-2. 4229 Connections to Control ......................................................................................................7-2
Figure 8-1. 4285/4286 Phone Module Wiring Connections..........................................................................8-3
Figure 9-1. Typical Sounder Wiring ..............................................................................................................9-2
VISTA-10SEa SUMMARY OF CONNECTIONS DIAGRAM ..................................... Inside Back Cover
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
This manual is written to accommodate both the new and the experienced installer of
ADEMCO products. A general description of the entire system is located in the first section of
this manual. This includes the various features available and the optional peripheral devices
that the system can support.
This manual is divided into separate sections. A section covering the basic wired zones (1-6)
provides complete information on the capabilities of each basic wired zone, including its
usage, programming, and a checkout procedure. Separate sections are also provided for each
peripheral device that can be used in the system, and include wiring setup, programming
requirements, and a checkout procedure for that device. Following the checkout procedures
ensures that the specific device is operational in the system before you proceed to the next
section. This "sectional" arrangement is also particularly useful if you are making an addition
iv

How to Use This Manual