Specifications & Accessories; Specifications - ADEMCO Vista-10SEa Installation And Setup Manual

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section

Specifications

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Specifications
VISTA-10SEa Security Control
1. Physical: 318mm W x 368mm H x 76mm D)
2. Electrical:
3. Communication:
4. Maximum Zone Resistance: Zones 1–6 = 300 ohms excluding EOLR.
6128EX/6128RF Remote Keypad
1. Physical: (146mm W x 121mm H x 26mm D).
2. Electrical:
3. Interface Wiring: To control panel's keypad connection points.
6137 Remote Keypad
1. Physical: (129mm W x 162mm H x 45mm D).
2. Electrical:
3. Interface Wiring: Same as 6128, except uses a color-coded wire loom.
Specifications & Accessories
Voltage Input: 16.5VAC from 1.5 Amp plugpack, Model XF1.
Rechargeable Backup Battery: 12VDC, 6.5AH (sealed lead acid type).
Charging Voltage: 13.8VDC.
Alarm Sounder: 12V, 2.0 Amp output.
Auxiliary Power Output: 12VDC, 500mA max. Interrupts for 4-wire smoke
detector reset.
Standby Time: (see Table in Section 10: FINAL POWER-UP)
Formats Supported:
ADEMCO Local Audio (3 characters/sec., DTMF Data Tones, no
ACK or KISSOFF).
ADEMCO Contact ID Reporting
10 characters/sec., DTMF Data Tones, 1400/2300Hz ACK, 1400Hz
KISSOFF.
Line Seize: Double Pole.
Voltage Input: 12VDC.
Current Drain: 30mA (6128EX), 65mA (6128RF).
RED (R): 12VDC input (+) aux power.
GREEN (G): Data Out to control.
YELLOW (Y): Data In from control.
BLACK (B): Ground.
Voltage Input: 12VDC.
Current Drain: 85mA.
S E C T I O N
Accessories (Compatible Devices)
1 7
17-1