Scan Mode - Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F

1.3.2.4 Scan Mode

BUTTON FUNCTIONS
Button name
Copy Moves to copy mode
Fax Moves to fax mode
Scan Moves to print mode
Setup Moves to setup mode
One touch speed dial A Moves to fax mode, and dials the registered number.
One touch speed dial B
One touch speed dial C
Advanced/Menu button Shifts from scan mode initial screen to advanced scan menu
screen
Reset button 1. Short press: Performs initialization
2. Long press (hold for more than three seconds): Perform
initialization for all the settings
Up/Down Scrolls up/down in the setting items
Left/Right Opens subsequent menus or backs to previous menu, or
exits the menu
Selects and changes the setting
Speed dial Invalid
Redial Invalid
Cancel button Invalid
Asterisk/Hash buttons Invalid
Ten-key Invalid
Start Standard scanning using the document table: Auto select
Other than the above: Start
Note *1: All the modes become inoperative when system error occurred.
*2: If the error that requires user intervention to be cleared has occurred, users cannot switch modes until they cancel the error.
If there is an error concerning device that is diagnosed as device failure at start-up, switching between modes is impossible.
Idling
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Local PC: Invalid
Network: Cancels scanner job
Invalid
Invalid
Invalid
Running
Unable to move to copy mode.
In copy mode, switch to print mode.
Moves to fax modeIn fax mode, switch to print
mode.
Unable to move to scan mode.
In scan mode, switch to print mode.
Moves to setup modeIn setup mode, switch to print
mode.
Does not shift to fax mode and dial
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Clears the errorFax initialization
Revision B
Error LED
61