Logging - Motorola Netopia Embedded Software Handbook

•
Last Member Query Count – the number of Group-Specific Query messages sent before the router
assumes that there are no members of the host group being queried on this interface. The default last
member query count is 2.
•
Fast Leave – Toggling this option to On enables a non-standard expedited leave mechanism. The querier
keeps track of which client is requesting which channel by IP address. When a leave message is received,
the querier can check its internal table to see if there are any more clients on this group. If there are none,
it immediately sends an IGMP leave message to the upstream querier. By default, Fast Leave is set to Off.
Press Escape twice to return to the System Configuration menu.

Logging

You can configure a UNIX-compatible (BSD syslog protocol - RFC 3164) syslog client to report a number of
subsets of the events entered in the Router's WAN Event History. See
Select Logging from the System Configuration menu.
The Logging Configuration screen appears.
WAN Event Log Options
Log Boot and Errors:
Log Line Specific:
Log Connections:
Log PPP, DHCP:
Log IP:
Syslog Parameters
Syslog Enabled:
Hostname or IP Address:
Facility...
Log Filter Violations:
Log Accepted Packets:
Log Access Attempts:
Return/Enter accepts * Tab toggles * ESC cancels.
By default, all events are logged in the event history.
•
By toggling each event descriptor to either Yes or No, you can determine which ones are logged and which
are ignored.
•
You can enable or disable the syslog client dynamically. When enabled, it will report any appropriate and
previously unreported events.
•
You can specify the syslog server's address either in dotted decimal format or as a DNS name up to 63
characters.
•
You can specify the UNIX syslog Facility to use by selecting the Facility pop-up.
Logging Configuration
Yes
Yes
Yes
Yes
Yes
No
Local 0
No
No
No
System Configuration 3-55
"WAN Event History" on page 9-4.