Physical Interfaces Commands - Motorola nvg589 Administrator's Hanbook

Administrator's Handbook

Physical interfaces commands

DSL interfaces
set physical dsl enable [ off | on ]
Turns the physical DSL interface off or on. Default is on.
set physical dsl dsl-mode [ auto | single | bonded ]
Sets the mode for the DSL connection, whether a single line or bonded. If the default auto is set, the device will
try both single and bonded, attempting to detect and lock on the mode in use.
set physical dsl loopback [ off | on ]
Turns the DSL loopback mode off or on. Default is off.
set physical dsl annexm [ off | on ]
Turns optional DSL Annex M off or on. Default is off. If enabled, data rates can be as high as 12 or 24 Mbit/s
downstream and 3 Mbit/s upstream depending on the distance from the DSLAM to the customer's premises.
set physical dsl modulation auto [ off | on ]
Turns automatic DSL modulation off or on. Default is off.
set physical dsl modulation vdsl2 [ off | on ]
Turns vdsl2 DSL modulation off or on. Default is on.
set physical dsl modulation adsl2 [ off | on ]
Turns adsl2 DSL modulation off or on. Default is on.
set physical dsl modulation adsl2+ [ off | on ]
Turns adsl2+ DSL modulation off or on. Default is on.
set physical dsl modulation annex-l [ off | on ]
Turns annex-l DSL modulation off or on. Default is off.
set physical dsl modulation annex-m [ off | on ]
Turns annex-m DSL modulation off or on. Default is off.
set physical dsl profile-8a [ on | off ]
Enables or disables VDSL2 profile 8a governing upstream and downstream bandwidth. Default is on.
set physical dsl profile-8b [ on | off ]
Enables or disables VDSL2 profile 8b governing upstream and downstream bandwidth. Default is on.
150