Auto Paper Selection/Auto Drawer Switching - Canon CLC5151 Reference Manual

Auto Paper Selection/Auto Drawer Switching

You can set which paper sources can be used for Automatic Paper Selection and Auto Drawer
Switching. This setting can be made independently for all functions of the machine, and is
especially useful when you want to use different paper sources for different purposes.
NOTE
Paper sources set to 'On' are used for the following functions:
- APS (Auto Paper Selection): The machine automatically selects the appropriate paper size (paper
source) based on the original's size and copy ratio settings (when making a copy), or the set ratio of
the image (when receiving a fax).
- ADS (Auto Drawer Switching): If a paper source runs out of paper during a continuous print job, the
machine automatically selects another paper source with the same paper size, and begins feeding
paper from that paper source.
4
1
2
4-32
Specifying Common Settings
Press [Common Settings]
Select [Copy], [Printer], [Mail Box], [Receive/Fax], or [Other].
[Copy] is displayed only if the optional Color Image Reader-E1 or Color Image Reader-F1 is
attached.
For the CLC5151/CLC4040:
[Printer] appears only if the optional Color Network Printer Unit is installed.
[Receive] appears only if the optional Color Image Reader-E1 or Color Image Reader-F1 is
attached, and the Color Universal Send Kit is activated.
[Fax] appears only if the optional Color Image Reader-E1 or Color Image Reader-F1 is
attached, and the Super G3 FAX Board is installed.
[Receive/Fax] appears only if optional Color Image Reader-E1 or Color Image Reader-F1 is
attached, the Color Universal Send Kit is activated, and the optional Super G3 FAX Board is
installed.
For the iR C4580i/iR C4080i:
[Receive/Fax] appears only if the optional Color Image Reader-E1 or Color Image Reader-F1 is
attached, and the Super G3 FAX Board is installed.
[Receive] appears if the optional Color Image Reader-E1 or Color Image Reader-F1 is
attached, and the Super G3 FAX Board is not installed.
[Other] is used for specifying the paper source for printing reports.
[Drawer Eligibility For APS/ADS].