Placing Originals; Document Sizes - Canon CLC5151 Reference Manual

Placing Originals

You can scan originals using this machine only if the optional Color Image Reader-E1 or Color
Image Reader-F1 is attached.
Place your originals on the platen glass or into the feeder, depending on the size and type of the
original, and the copy modes that you want to use.
NOTE
If the original has too many pages to be placed in the feeder all at once, use the Job Build mode on the
Special Features screen. (See Chapter 4, "Special Copying and Mail Box Features," in the Copying and
Mail Box Guide or Chapter 4, "Special Scanning Features," in the Sending and Facsimile Guide.)
Platen Glass
Place the originals on the platen glass when copying bound originals (such as books and magazines),
heavy or lightweight originals, and transparencies.
Feeder
Place the originals into the feeder when you want to copy several originals at the same time, and
press . The machine automatically feeds the originals to the platen glass and scans them. Two-sided
originals can also be automatically turned over and scanned as two-sided documents.

Document Sizes

The size of the original is automatically detected, and the document is scanned. When you are
sending fax documents, if the output paper in the recipient's machine is not equal to the
scanned document size, the original image may be either reduced in size or divided into smaller
parts before it is sent.
The machine cannot always detect the size of the original if it is a nonstandard paper size, such
as a book. In this case, specify the size at which you want to scan the original. (See Chapter 3,
"Basic Scanning Features," in the Sending and Facsimile Guide.)
2-37

Placing Originals

2