Table of Contents
Advertisement
Chapter 3
SSR Configuration
Error Correction
The Error Correction window provides an ability to turn Error Correction On or Off. The default is Off.
If Error Correction is On and a data block becomes corrupted or inaccessible, Error Correction will
reconstruct the data block content using parity. Some usage guidelines are:
•
•
To access the Error Correction switch, choose SSR Configuration > Error Correction.
Support Settings
The Cisco Installation Team will have configured Cisco UCS Invicta Scaling System so that there is SRR
communication and SSR-to-SSN communication. The SSRs are connected to the network and are now
controlling the network data sent to the SSNs. Network Configuration settings have been entered in the
Support Settings window.
These settings include:
•
•
•
•
•
•
•
•
•
Support Setting Configuration
To verify or modify support settings, do the following:
Choose SSR Configuration > Support Settings.
Step 1
The Support Settings window appears.
Complete or modify field information as necessary. See
Step 2
Settings fields.
Where maximum data protection is needed, Error Correction is usually turned On.
Where maximum performance is needed, Error Correction is usually turned Off as it has an impact
on reading performance of up to 15%.
Host Name
SMTP Server
SMTP User
Autosupport CC
Send from Domain
Proxy URL/IP
Proxy Port
NTP Server
Time Zone
Cisco UCS Invicta Scaling System Administration and Configuration Guide, Version 5.0.1.1a
Table
3-4, for a description of the Support
3-11
Advertisement
Table of Contents
