11
-
84.0
Hall-effeet transmitter
cover- installing
Offer up the Hall-effecllransmitter cover, with seal, and
tighten the retaining screws.
Tightening torque:
Cover retaining screws
6
±
1
Nm
Freehweel and auxiliary
shaft- installing
Insert
the
spring.
Note the correct
installed
position
:
the
large
diameter
is in
contact
with the freewheel gear.
Install the auxiliary shaft with freewheel.
Important:
When
installing
a
new part,
always
clean off the corrosion
protection material and apply
a
generous coat of engine
oil.
Insert the countershaft.
Intermediate
flange - installing
Note:
Ensure that all adapter sleeves are present.
The joint face must be free
ofoil
and
grease.
Apply
a
thin
coat of
Three
Bond
1207
B to the jOint face. Offer up the
intermediate
flange and tighten the retaining screws with
Torx
insert
BMW No.
002600.
Note:
Rememberto install the filler.
Tightening torque:
Intermediate flange retaining
screws
9
±
1Nm
8.87