Timing Chain Cover - Installing - BMW K75 Repair Manual

7511t17
11 - 82.0
Insert BMW special pliers 11 1 730 through the groove in
the tappet and under the shim plate and take out the clip to
theside.
Important:
On each occasion after adjusting valve clearance, the
throttle butterfly stub pipe assembly must be synchronized
(see page 13-07.0).
Timing chain cover- installing
The sealing faces must befree of oil and and grease.
Apply a thin coat of Three Bond 1207 B to the sealing
faces.
Ofter up the timing chain cover and tighten the retaining
screws.
Note :
Carefully push the timing chain cover over the rotor flange.
Tightening torque:
Timing chain cover retaining screws 7
±
1 Nm
8.87