Clutch Cable - Removing And Installing - BMW K75 Repair Manual

Increased starting speed - adjusting
Increased starting speed is adjusted at adjuster screw (1)
(slacken locking nut (2) first).
Push in the choke on handlebar by the first stage and turn
adjuster screw (1) until the idle adjuster screw rises
through dimension "a". The second stage mustthen
producedimension "b".
[eeeJ
Dimension "a" 1.5 mm
Dimension "b" 3.5 mm
[eHe]
Dimension "a" 1.0 mm
Dimension "b" 2.5 mm
Clutch cable-removing and installing
[
...
[
Remove fuel tank (see Group 16).
Remove impact pad .
1 • • • • 1
K 100 RS, RT, L T: remove knee pads on lell and right (see Group 46).
Remove fuel tank (see Group 16).
Remove impact pad .
Disconnect clutch cable (arrow) and puli out of gear
housing.
Release cable connector beneath the batterytrim
mounting.
8.87
32-15.0