Lights; Installing Timing Case Cover; Installing Hall-Effect Transmitter - BMW K 1100 LT/RS Repair Manual

3
4

Installing timing case cover

Apply a thin coat of 3-Bond 1209 to the sealing
•
faces, which must be free from oil and grease.
Pass the wires for the telltale lights (oil pressure,
•
coolant temperature) through the cable duct (ar-
row).
Place the timing case cover in position and tight-
•
en it.
X
Tightening torque:
Timing case cover .......................................... 7 Nm
1
2

Installing hall-effect transmitter

Screw adjusting disc (1) and gate rotor (2) to the
•
crankshaft.
X
Tightening torque:
Gate rotor ................................................... 2.5 Nm
Insert baseplate (3) for Hall-effect transmitter.
•
The cutouts in the baseplate and timing case
•
cover should coincide.
Insert the retaining screws with shim washer and
•
semi-circular washer (4).
X
Tightening torque:
Baseplate....................................................... 6 Nm
LT110701
11.47