Selector Forks - Installing; Selector Drum - Installing - BMW K75 Repair Manual

Selector forks - installing
Insert selector lork lor 5th (identified by cutout) into the
output shaft spur gear with the short guide end upwards.
Insert selector lorks for 1 st and 2nd (2) into the output
shaft spur gear with the short guide end downwards.
Insert selector lorks lor 3rd and 4th (4) (narrow, elongated
shape) into the intermediate shaft spur gear with the short
gu ide end downwards.
Selector drum - installing
Engage pawl in housing wall with ciamping device lor
chain tensioner BMW 11 5 500.
Press back input shaft and selectorforks in the direction 01
the arrow.
Note:
To preventthe rollers from lalling, locate them on the
selector lork guide journals.
Insert the selector drum (2) in such a way that the id le
position stop points towards the segment (dptled line).
Pivot the selector lork lor 5th gear (3) inwards and
introduce the guide journal in the selector drum.
Pivot the selector lorks lor 1 st and 2nd ge ars (2) inwards
and introduce the guide journals in the selector drum.
Note:
To lacilitate assembly, raise spurgears lor 1 st and 2nd
slightly with an angled screwdriver (or wire hook etc.).
Pivot selector lorks lor 3rd and 4th (4) inwards and
introduce the guide journals in the selector drum.
Install the lubricated selectorfork shafts.
Remove the ciamping device on the pawl.
Turn the input shaft to the centre position.
8.87
2 3
1
~~.
~Z>~5
-r~
4
75 23 047
7523033
23-39.0