46-52.0
Tap
the
telescopic lork several times with a plastic mallet
to push down
until
the upper bearing
is
exposed, and take
outthe bearing.
K
75 c
with
cylindrical steering head tube
To avoid damage to the Iluidbloc cover overthe thread on
the steering head tube
with
1 1/2layers
01
adhesive tape.
1
• • •
1
Secure
locking
tube (arrow), unscrew adjusting ring (1)
and taper roller bearings on steering
head
tube.
Secure BMW hoist 00 1 510 tothe oil sump with 4 knurled
screws.
Tighten the
retaining
screws (arrows).
Raise the engine until
the
Iront wheel
clears the
ground.
8.87