BMW K75 Repair Manual page 317

1520006
33-22.0
Rear swinging arm - removing
Remove both silencer retaining screws (arrows) on left-
hand footrest plate.
Remove retaining screws (arrows 1,2,3) on left-hand
footrest plate and take off foot rest plate.
Remove retaining screws
(1,2,3) for right-hand footrest
plate. Set down footrest plate.
Lift clutch cable out of withdrawal arm.
Remove left-hand swinging arm bearing:
Remove bearing journallocking nut (arrow) .
Unscrew bearing journal (1) with 6 mm Allen key.
Remove three retaining screws for swinging arm fixed
bearing .
Remove!wo screws.
Insert BMW extractor 26 1 660 in fixed bearing centre
hole and lock in position.
Unscrew the third retaining screw.
Pull out fixed bearing with a slight turning action.
Take outthe swinging arm.
8.87