BMW R1150RT - MAINTENANCE INTEGRAL ABS Maintenance Manual Page 25

Hide thumbs
Installing cover for windscreen
adjuster and installing windscreen
Install the cover for the windscreen adjuster.
Install windscreen with washers.
Install the aerial.
Installing mirrors
Connect the turn indicators.
Position the mirror at the 3 attachment points.
Engage by pressing at the front first, then the
rear.
00.20
Assembling case
R22000060
Position the lid on the case for alignment. Open
the hinges of the lid and guide them into the base
with the guide hook.
From the inside, insert the pop rivets into the
base and the hinges.
2x long rivets in hinge at rear, as viewed in for-
ward direction of travel.
2x short rivets in hinge at front, as viewed in for-
ward direction of travel.
Engage riveting tool on rivets, hold the hinge at
the outside to keep it in position and secure all
four rivets.
Oil the seal in the bottom of the case, using the
sponge provided for the purpose.
e
Attention:
Make sure that the seal is not squeezed out of
shape and that the lid closes without catching.
Carefully close the case.
Insert the lock cylinder into the case with the key
in the lock and turn the lock.
RT460280
Affix the stickers.
R22000070

Advertising

Comments to this Manuals

Symbols: 0
Latest comments:
  • GHGHGH Feb 04, 2015 09:08:
    MUY UTIL MUY BIEN, MUY UTIL MUY BIEN, MUY UTIL MUY BIEN