Rear Wheel - Installing; Left Footrest Plate - Installing - BMW K75 Repair Manual

'--_ _ _ _ _ _ _ _ _ _ _ _ 75 23064
23-26.0
Models with rear drum brake
Secure the footrest plate with three retaining screws.
Run the pu ll rod through the brake backplate and screw
on the wing nut(1).
Rotate the rear wheel and turn the wing nut on the pu ll rod
until the wheel is just braked.
Then slacken off. t hewing nut by 3 to 4 turns (equivalentto
app . 25 mm foot brake lever play).
All models
Connect up plugs for brake light (1), speedometer sensor
and gear switch.
Attach cable connectors (arrows).
Rear wheel- installing
The wheel centering surface and wheel hub contact faces
must be absolutely clean and free of all traces of grease.
Note:
Use only
55 mm
lang wheel
studs
(ar rear drum brakes,
and 60
mm
lang wheel
studs
(ar rear disc brakes. Note the
designation number on the stud head.
Tightening torque:
Wheel studs 105 ± 4 Nm
Left footrest plate - installing
Attach the footrest plate with three retaining screws (see
illustration, centre).
Exhaust system - installing
Insert the two si lencer mounting bolts through the footrest
plate and screw on the stop nuts.
Tightening torque:
Silencer on footrest plate
9±1Nm
8.87