BMW K75 Repair Manual page 293

Pull back Ihe sleeve on wire cable and feed Ihe cable oul
Ihrough the slol in Ihe side of the housing.
24913 012
Disconnect wire cable in throttle butterfly system:
Slacken off locking nut (1) for adjusting screw (2) and
unscrew adjusling screw complelely (remove).
Push cable forward past bracket (arrow) on lever and
disconnect.
When instal/ing:
Connect cable up to lever with the aid of pointed pliers.
Release the cable connector at the front right comerof the frame triangle .
K75, c, s, K
100:
Pull cable up through frame triangle and remove .
K 100 RS, RT,
LT:
Pull cable down between radiator upper edge and frame, and remove.
Install following the same procedure but in the reverse order.
32-14.0
8.87