Throttle Butterfly Switch - Removing And Installing - BMW K75 Repair Manual

Turn the adjusting screw on the air volume gauge with a
5 mm Allen key.
The CO-value shou ld not be greater than 2
±
0.5% by
volume. (The fuel tank has been removed here to provide
a better illustration).
Aftertaking the measurement, check engine idling with
BMW 'Synchrotester' 13 0 700 and adjust if necessary.
Throttle butterfly switch - removing and installing
Slacken off the retaining screws (arrows) for the throttle
butterfly switch .
Pull the throttle butterfly switch off the throttle butterfly
shaft. Pull off the multi-pin plug (arrow); loosen the wire
keeper if necessary.
When insta/ling:
Adjust the throttle butterfly switch (by rotating the shaft) so
that a clear "clicking" noise is heard when the throttle
tWistgrip is turned .
8 .87
13 - 09.0