Table of Contents
Advertisement
Cleaning the motorcycle
Position windshield on fairing
and
screw in M 5
x
25
retaining screws (arrows) with hoilow discs.
Tighten retaining screws, working from the centre
outwards.
Screw
in retaining
screw
(arrow) on either
side
with nut
and
rubber washer from the
outside and
tighten.
As
a
rule,
al
l
areas
treated with a protective coating, in
other words chromium
plated
and
bright
metal
parts,
aluminium
and
brake
elements
,
can easi ly be cleaned
with
a clean,
soft cloth.
Dry protective coating is removed as fo liows:
Removing wax with a steam
jet:
• Set
the temperature to max. 80°C
•
Dissolve cleaning agent (protective coating remover) in
water
(app. 5-7%
solution). (See
current
Service
Information for recommended protective coating removers.)
•
Hold
steam
jet at
least
30 cm from surfaces.
Removing wax manuaily:
•
Dissolve cleaning agent (protective coating remover)
in
water (app. 5-7% solution).
(See
current Service
Information for recommended protective coating removers.)
•
Apply diluted cleaning agent (protective coating remover)
or
conventional car
shampoo with a spray
pistol or
cloth.
•
Ailow to actfor app. 10-15 mins.
•
Wash off cleaning agent with water
no
hotterthan 80°C.
Degrease brake disc with
care!
e.g. with
thinners
or
commercial brake
cleaner.
00
-20.0
8.87
Advertisement
Table of Contents
