Footbrake Light Switch - Removing And Installing - BMW K75 Repair Manual

Footbrake light switch - removing and installing
Remove both lower cable connectors.
Disconnect plug for brake light switch (1) .
Cable coding:
Yellow} { Green/grey
Yellow => Green/black
Remove retaining screws (1, 2, 3) for right-hand footrest
plate . '
Microswitch (Ielt-hand illustration):
Remove retaining screw (arrow) and take out switch.
Valvar switch (right-hand illustration) :
Unscrew switch with 11 mm open-ended wrench.
Assemble following the same procedure but in the reverse
order.
When inslalling microswilch:
The switch mounting plate must be in contact with the cast
rib ofthe footrest plate (arrow). Actuator lug must not be in
contact with the footrest plate .
When the footbrake lever is actuated, the switch must be
heard to click .
Applya coating 01 Loctite 242 to the retaining screw and
tighten the screw slightly (max. 5 Nm).
8.87
\
249 J~ 026 .·· ·
34-19.0