Final Drive Oil - Changing; Final-Drive Inductive Transmitter - Cleaning; Spark Plug Electrolyte Gap - Checking - BMW K75 Repair Manual

ll n
E8100043
00-32.0
Final drive oil- changing I, 111
Remove oil drain plug from final drive and drain off the oil.
Renewthe drain plug sealing ring.
Tightening torque:
Oil drain plug
25 ± 3Nm
Remove oil filler plug.
After relilling with Iresh oil, the oil should come up to the
bottom ofthe thread on the filler aperture.
Renew sealing ring forfiller plug.
Filling capacity :
0.261
Oil grades: see Service Data, page 00 - 29.0
Tightening torque:
Oil Iiller plug
20 ± 2Nm
Final-drive inductive transmitter- cleaning 1,111
Remove retaining screw (arrow) and pull out inductive
transmitter; carefully lever out with screwdriver il
necessary.
Clean inductive transmitter with cloth .
Tightening torque:
Machine screw
2.5Nm
Spark plug electrode gap - checking 11
Electrode gap
=
0.6 ... 0.7 mm
If the electrode gap is greater than 0.9 mm, renew the
sparkplug.
Warning
00 not bend down the spark plug electrode, as this could
cause it to break off during operation, resulting in engine
damage.
8.87