Table of Contents
Advertisement
46035
63-08.0
K 75
c,
K
100
headlight - installing
Connect up plugs on headlight for H4
bulb
and parking
light.
Only push the
headlight
into the holder
until
the mark on
the
engaging plate is aligned with the mark on the
holder.
Press headlight
adjusting device
(arrow) into front
headlight ring.
Tighten headlight retaining nut.
K 75 s headlight- removing and
installing
Remove fairing
side
and
centre
sections (see Group 46).
Pull off plugs
for
•
H4bulb(1)
•
Parking light bulb (2)
and
•
Horn (3).
Remove headlight ring retaining screws (4). Take off
headlight ring together with headlight and horn. Lever
headlight out of the three pivots.
Assemble following the same procedure but in the reverse
order.
K
100 RS, RT, L T headlight- removing and installing
Remove fairing (see Group 46)
.
Remove retaining
screws (arrows) and
take out
complete
headlight.
Assemble following the same procedure but in the reverse
order.
8.87
Advertisement
Table of Contents
