Oil In Telescopic Fork - Changing - BMW K75 Repair Manual

00 - 42.0
Turn the individual recirculated air screws (arrows)
clockwise or anticlockwise to synchronise operation 01
each cylinder, i.e. the three orlour mercury columns must
all show the same level.
Adjust idle speed at idle speed adjusting screw (arrow).
Idle speed 950
±
50 min -
1
Note:
When starting to turn the throttle twistgrip, a click must be
clearly heard; il not, the idle speed adjusting screw has
been screwed in too lar.
Oil in telescopic fork - changing 1 ,111
Remove stop cap with screwdriver
Remove liller screw with Allen key, preventfrom turning
with open-ended wrench il necessary.
Note:
K 75 c, K 75 sand K 100 RS: remove retaining screws lor
impact plate, slacken off handlebar mounting and turn
handlebarto the rear.
Tightening torque:
Handlebar mounting 16 ± 2Nm
Remove oil drain plug (arrow) in sliding tubes on both
sides and allow oil to drain out.
When no more oil drains out, remove the motorcycle from
the supports and compress the lront lork several times .
8.87