Wireless Mac Address Filter; Table 17 The Mac Filter Parameters - Zte ZXV10 W300 Maintenance Manual

Wireless MAC Address Filter

The MAC filter function allows the user to configure the W300 to give access
or deny access to specified devices. Every Ethernet device has a unique MAC
(Media Access Control) address. The MAC address is assigned at the factory
and consists of six pairs of hexadecimal characters, for example,
00:AA:BB:00:00:02.
Table 17 describes the parameters.
T 1 7 T M A C F
A B L E H E
Parameter
Active
Action
MAC Address
#1 ~ #8
Click the SAVE button to save the changes, for configurations mentioned in
this chapter.
P
I L T E R A R A M E T E R S
Description
Select Activated to enable MAC address filtering.
Select Deny Association to block access to W300 or select
Allow Association to permit access to W300
Enter the MAC address of the devices that are allowed or denied
access to the router in these address fields.
Proprietary Information of ZTE CORPORATION
Chapter 2 - Product Installation
29