Cluster Manage; Cluster Member - TP-Link T2700G-28TQ Cli Reference Manual

T2700G-28TQ JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
Example
Configure the newly created cluster name as tp:
T2700G-28TQ(config)#cluster commander tp

cluster manage

Description
The cluster manage command is used to configure the hold time and interval to
send handshake packets of the cluster. To return to the default configuration,
please use no cluster manage command.
Syntax
cluster manage [ holdtime hold-time | timer interval-time ]
no cluster manage [ holdtime | timer ]
Parameter
hold-time —— Hold Time, which is the time for the switch to keep the cluster
information. Hold Time ranges from 1 to 255 in seconds. It is 20 by default.
interval-time —— Interval Time, which is the interval to send handshake packets.
Interval Time ranges from 1 to 255 in seconds. It is 20 by default.
Command Mode
Global Configuration Mode
Example
Specify the Hold Time and Interval Time of the cluster as 50 seconds:
T2700G-28TQ(config)#cluster manage holdtime 50
T2700G-28TQ(config)#cluster manage timer 50

cluster member

Description
The cluster member command is used to add member switch. To delete the
corresponding member, please use no cluster member command. The
add/delete operations of member switches should be implemented by the
commander switch according to the MAC address.
Syntax
cluster member {mac-address mac-address}
282