T3700G-28TQ
JetStream 28-Port Gigabit Stackable L3 Managed Switch CLI Guide
show running-config
Description
The show running-config command is used to display the current operating
configuration of the system or of a specified port.
Syntax
show running-config [ unitid ]
Parameter
unitid —— Specify the unit in the stack to display its operating configuration. If
not specified, all the members' operating configurations will be displayed in the
stack.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display all the members' current operating configuration in the stack:
T3700G-28TQ#show running-config
show boot
Description
The show boot command is used to display the current boot configuration of
the system.
Syntax
show boot [ unitid ]
Parameter
unitid —— Specify the unit in the stack whose boot configuration information will
be displayed. If not specified, the boot configuration information of all the
switches in the stack will be displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
168