Ip Ssh Algorithm; Ip Ssh Timeout - TP-Link TL-SG3210 Cli Reference Manual

Example
Enable SSH v2:
TL-SG3424(config)# ip ssh version v2

ip ssh algorithm

Description
The ip ssh algorithm command is used to configure the algorithm in SSH
function. To disable the specified algorithm, please use no ip ssh algorithm
command.
Syntax
ip ssh algorithm { AES128-CBC | AES192-CBC | AES256-CBC | Blowfish-CBC
| Cast128-CBC | 3DES-CBC | HMAC-SHA1 | HMAC-MD5 }
no ip ssh algorithm
Parameter
AES128-CBC | AES192-CBC | AES256-CBC | Blowfish-CBC | Cast128-CBC |
3DES-CBC | HMAC-SHA1 | HMAC-MD5 —— Specify the SSH algorithm.
Command Mode
Global Configuration Mode
Example
Specify the SSH algorithm as AES128-CBC:
TL-SG3424(config)# ip ssh algorithm AES128-CBC

ip ssh timeout

Description
The ip ssh timeout command is used to specify the idle-timeout time of SSH. To
restore to the factory defaults, please use ip ssh timeout command.
Syntax
ip ssh timeout value
no ip ssh timeout
Parameter
value —— The Idle-timeout time. During this period, the system will automatically
release the connection if there is no operation from the client. It ranges from 1 to
120 in seconds. By default, this value is 120 seconds.
104