Functional Listing Of Logs; Measurement Data Logs; Satellite Data Logs; Receiver Status Logs - Novatel WAAS G-III User Manual

Data Logs
5.3

Functional Listing of Logs

The following tables list the logs by function.
Log
ALLSQMIB
ALLSQMQB
CORRDATAB
CORRLOCATIONB
MEASUREMENTDATAB
RANGEB
TIMESOLUTIONB
Log
ALMANACB
RAWFRAMEDATAB
RAWGPSSUBFRAMEWPB
RAWWAASFRAMEWPB
SATPOSB
Log
AGCINFOB
CARDSTATUSB
ETHSTATUSB
EXCEPTIONDATAB
FACTORYDATAB
RXCOMMANDSB
SOFTLOADSTATUSB
VERSIONB
WAAS G-III Reference Receiver User Manual Rev 1
Table 31: Measurement Data Logs
Contains SQM data for I correlators.
Legacy Log.
Contains SQM data for Q correlators.
Legacy Log.
Contains correlator data for all signals.
Contains correlator locations for all signals.
Contains raw measurement data for all signals.
Contains raw measurement data for L1 C/A and L2 P(Y) signals.
Legacy Log.
Shows the receiver time status.
Table 32: Satellite Data Logs
Contains the validated almanac.
Contains the raw navigation data for both GPS and SBAS signals.
One log is output for each tracking channel.
Contains the raw GPS subframe navigation data.
One log is output for each tracking channel.
Legacy Log.
Contains the raw SBAS frame navigation data.
One log is output for each tracking channel.
Legacy Log.
Contains the satellite position and status information.
Table 33: Receiver Status Logs
Contains the AGC status information.
Contains the status information for the receiver cards.
Contains the Ethernet status.
Contains the last recorded exception data from all cards.
Contains factory data for debug purposes.
Contains the command parameters set by default or by command.
Shows the current status of the upgrade process.
Contains the receiver version information.
Description
Description
Description
Chapter 5
91