Restore - Novatel WAAS G-III User Manual

Commands

4.4.19 RESTORE

This command restores the Ethernet configuration to its default values by deleting any saved Ethernet
configuration from NVM. After the Ethernet configuration is erased from NVM, the receiver resets. For a list
of the default Ethernet configuration values, see Table 14 Factory Defaults for Commands on Page 36.
Valid States:
Valid Modes:
Acceptable Ports:
Syntax:
RESTORE
Example:
RESTORE
WAAS G-III Reference Receiver User Manual Rev 1
Configuration, Maintenance
Normal, Failed
Maintenance
Chapter 4
69