Enclosure; G-Iii Reference Receiver Back Panel; Power Ports - Novatel WAAS G-III User Manual

Introduction
1.3.1

Enclosure

The G-III Reference Receiver is contained in an enclosure that is designed to fit standard 19-inch EIA racks.
1.3.1.1 LCD Status Display
The LCD display on the front of the G-III Reference Receiver enclosure provides basic status information
regarding the unit. See Section 3.4, Status Display on Page 29 for more details.
1.3.1.2 Input/Output Ports
The G-III Reference Receiver provides a variety of ports on the rear panel of the enclosure for power, antenna
input and general communications.
J01
GND
WAAS G-III Reference Receiver User Manual Rev 1
Figure 4: G-III Reference Receiver back panel
Table 1: Power Ports
Label
The power input port.
J01
Connects the G-III Reference Receiver to the 120/240 V power
source.
Chassis ground.
GND
Connects the G-III Reference Receiver to the mounting hardware
ground.
Description
Chapter 1
19