Rxcommandsb; Commands Included In Rxcommandsb Log - Novatel WAAS G-III User Manual

Data Logs

5.5.16 RXCOMMANDSB

This log contains the current receiver configuration parameters set either by default or by user issued
commands. Each command may be included multiple times since they configure different signal types.
 The command field is output as ASCII text.
The header and CRC are in binary format.
There is a null between each command output.
For the NSCODE command, the nonstandard field is not output in the RXCOMMANDS log.
Output states:
Valid trigger:
Frequency:
Message ID:
Header Format:
Field Field Name
1 Header
2 # com
3 Command
4 32 bit CRC
WAAS G-III Reference Receiver User Manual Rev 1
Configuration, Operational, Maintenance
ONCE, ONTIME
When requested
4105
G-III Log
Description
G-III log header
Number of entries to follow
The command and its parameters
Table 48: Commands Included in RXCOMMANDSB Log
AGCMODE
ANTENNAPOWER
ASSIGN
CHANCONFIG
CORRSPACING
DLLBW
ECUTOFF
ETHCONFIG
FIX
ICOMCONFIG
IPCONFIG
LOG
NSCODE
PLLDYNAMIC
PULSEBLANKING
RFATTEN
RFIFTEMP
THRESHOLD
TRACKMODE
TRACKTYPE
Commands
Chapter 5
Format # Bytes
H
Ulong 4
ASCII string variable
Hex 4
Binary
Offset
0
H
H+4
variable
121