Novatel WAAS G-III User Manual page 58

Chapter 4
The following alternate syntax has no effect on the receiver configuration. Instead, the command response
contains the current virtual COM port configuration.
Alternate Syntax:
ICOMCONFIG port
Example:
ICOMCONFIG ICOM2
<INFO:ICOMCONFIG ICOM2 UDP 255.255.255.255:3001 ETHB
Field Field Name
1 port
2 protocol
3 endpoint
4 BindInterface
58
Description
The virtual port identifier.
The IP protocol for the connection.
Select disabled to prevent any communications on the
virtual port.
The peer host IP address and UDP port number to
communicate with in the format Host:Port.
If the Host IP address is not provided then the receiver
acts as a server.
If the BindInterface is ETHB (i.e., the Monitor port), the
Host must be a broadcast or subnet broadcast IP
address.
This field is only optional if the protocol is set to
disabled.
The physical interface to which the ICOM port is
bound.
This field is only optional if protocol is set to disabled.
WAAS G-III Reference Receiver User Manual Rev 1
Commands
Range Precision
icom1
N/A
icom2
udp
N/A
disabled
Host:
IPv4 address
N/A
Port:
1 to 65535
ETHA
N/A
ETHB