Chapter 4
4.4.2
ANTENNAPOWER
This command enables or disables the supply of electrical power from the internal power source of the receiver
to the low-noise amplifier (LNA) of an active antenna.
Valid States:
Valid Modes:
Acceptable Ports:
Syntax:
ANTENNAPOWER flag
Example:
ANTENNAPOWER on
Field
Field Name
1
flag
46
Configuration
Normal
Data
Enables (on) or disables (off) providing power to the
antenna.
Description
WAAS G-III Reference Receiver User Manual Rev 1
Commands
Range
Precision
on
N/A
off