Changestate - Novatel WAAS G-III User Manual

Chapter 4
4.4.5

CHANGESTATE

This command forces the G-III Reference Receiver to change receiver states. It can change the receiver state
from Configuration to either Operational or Maintenance.
If the G-III Reference Receiver is in Failed mode, it will not change to the Operational state.

Exception data must be erased for placing the receiver into the Operational state.
Use the CLEAREXCEPTIONDATA command to erase the data.
Valid States:
Valid Modes:
Acceptable Ports:
Syntax:
CHANGESTATE state
Example:
CHANGESTATE operational
Field Field Name
1 state
50
Configuration
Normal, Failed
Data
Receiver state
Description
WAAS G-III Reference Receiver User Manual Rev 1
Commands
Range Precision
operational
N/A
maintenance