Clearexceptiondata - Novatel WAAS G-III User Manual

Commands
4.4.6

CLEAREXCEPTIONDATA

This command clears any previously saved exception data.
Exception data is information that is captured in non-volatile memory within the receiver to record information
about a receiver failure. Information is captured from the first event after the exception data is cleared. The
failure data can be retrieved after the receiver automatically restarts using a LOG command to retrieve the
EXCEPTIONDATAB log.

If there is exception data in non-volatile memory, you must clear the data using this command
before the G-III Reference Receiver can change to the Operational state.
Valid States:
Valid Modes:
Acceptable Ports:
Syntax:
CLEAREXCEPTIONDATA
Example:
CLEAREXCEPTIONDATA
WAAS G-III Reference Receiver User Manual Rev 1
Configuration
Normal, Failed
Data
Chapter 4
51