Exceptiondatab; Waas G-Iii Reference Receiver User Manual Rev - Novatel WAAS G-III User Manual

Chapter 5
5.5.9

EXCEPTIONDATAB

This log contains the last recorded exception data from all cards. One log is generated for every card.
The content of the data in this log is for the manufacturer's use only, and as such, more detailed information is
not provided in this document.

If there is no exception data stored in non-volatile memory, this log is not output and an error
message is returned.
Output states:
Valid trigger:
Frequency:
Message ID:
Header Format:
Field Field Name
1 Header
2 Card ID
3 NumCards
4 DataPresent
5 DataDeleted
6 DataCorrupted
7 Exception Data
8 32-bit CRC
110
Configuration, Operational, Maintenance
ONCE
When requested
4109
G-III Log
Description
G-III log header
Card Identification
The card from which the exception data in this log is
taken.
Number of cards on the G-III Reference Receiver
with exception data. This indicates the number of
logs that will be generated.
Indicates if there is exception data present in flash
memory at startup.
TRUE = there is exception data present
FALSE = there is no exception data present
Indicates if the exception data was successfully
deleted after the CLEAREXCEPTIONDATA
command was called.
TRUE = the exception data was successfully
deleted
FALSE = the exception data was not successfully
deleted
If the card did not have any exception data when
CLEAREXCEPTIONDATA was called, then this field
is set to TRUE.
Indicates if the exception data written in flash is
corrupted.
TRUE = exception data is corrupted
FALSE = exception data is not corrupted
The exception data for this card.
Format
Ulong
Ulong
BOOL
BOOL
BOOL
Uchar[10240] 10240
Hex

WAAS G-III Reference Receiver User Manual Rev 1

Data Logs
Binary
# Bytes
Offset
H 0
4 H
4 H+4
4 H+8
4 H+12
4 H+16
H+20
4 H+10260