Table of Contents
Advertisement
Chapter 4
4.4.7
CORRSPACING
This command changes the early minus late discriminator locations for the specified signal channel. This
command can be applied per channel as defined in the following table.
This command is valid only for L1 C/A SBAS channels. If another signal type is specified, this
command is rejected.
Valid States:
Valid Modes:
Acceptable Ports:
Syntax:
CORRSPACING signal svChan spacing
Example:
CORRSPACING L1geo 18 0.1
CORRSPACING L1geo 20 0.3
Field
Field Name
1
signal
2
svChan
3
spacing
a. This range of SV channels tracking L1GEO is for the G-III 18GPSALL8GEO configuration. This range
is different for other products.
52
Configuration
Normal
Data
Signal type
The SV channel the discriminator spacing is applied to.
Discriminator locations
Description
WAAS G-III Reference Receiver User Manual Rev 1
Commands
Range
Precision
L1geo
N/A
a
Int
18-25
0.1
0.3
N/A
1.0
Advertisement
Table of Contents
