Radio Frequency Ports - Novatel WAAS G-III User Manual

Introduction
J06
J06
10
10 MHz IN
MHz
IN
J07
J07
10 MHz OUT
10
MHz
OUT J08
J08 1 PPS IN
1 PPS
IN
J09
J09
1 PPS OUT
1 PPS
OUT
J10
J10
RF1 OUT
RF1
OUT
J11
J11
RF1 IN
RF1
IN
Section 2.1, Typical Installation on Page 22 provides information about connecting to the ports, while Table
54, Port Specifications on Page 136 in Appendix A gives specifications on the connectors and signals provided
at these ports.
WAAS G-III Reference Receiver User Manual Rev 1
Table 4: Radio Frequency Ports
Label
10 MHz frequency reference input port
Connects to an external 10 MHz frequency reference.
10 MHz frequency reference output port
Outputs the 10 MHz frequency reference signal.
1 Pulse Per Second (PPS) input port
This port is not available for use.
1 Pulse Per Second (PPS) output port
An output port for a 1 Pulse Per Second (PPS) signal used for time
synchronization.
Radio Frequency (RF) Output
An RF test port that outputs the RF signal received from the GNSS antenna.
Radio Frequency (RF) Input
Connects to the GNSS antenna.
This port can also supply DC power to the antenna. See Section 4.4.2,
ANTENNAPOWER on Page 46.
Description
Chapter 1
21