Cardstatusb - Novatel WAAS G-III User Manual

Chapter 5
5.5.5

CARDSTATUSB

This log contains status information for the IOMaster, all DSPC cards, the RF Carrier Card, all RF Daughter
Cards and the fans.

There are a total of three entries for the RFCC to report all the necessary information.
Output states:
Valid trigger:
Frequency:
Message ID:
Header Format:
Field Field Name
1 Header
2 State
3 Mode
4 Atten setting
5 #hours
6 DSPC Error Signal
7 #cards
8 component
9 Slot ID
98
Configuration, Operational, Maintenance
ONCE, ONTIME
When requested
4098
G-III Log
Description
G-III log header
Receiver operating state
0 = OFF
1 = CONFIGURATION
2 = OPERATIONAL
3 = MAINTENANCE
4 = BOOT
Receiver operating mode
0 = NORMAL
1 = FAILED
Software attenuator setting
Total number of hours of power on since
manufacture of IOMaster card.
Bit-field indicating the current state of all DSPC error
signals. The bit position corresponds to Card ID.
Number of cards to follow.
Component type
0 = UNKNOWN
1 = IOMASTER
2 = DSPC (Digital Signal Processing Card)
3 = RFCC (Radio Frequency Carrier Card)
4 = RFDC (Radio Frequency Daughter Card)
IOMaster = 7
DSPC = slot ID of DSPC
RFCC 1 (first RFCC values) = 4
RFCC 2 (second RFCC values) = 4
RFCC 3 (third RFCC values) = 4
RFDC = 4
Format # Bytes
Ushort
Ushort
Ulong
Ulong
Ulong
Ulong
Enum
Ushort
WAAS G-III Reference Receiver User Manual Rev 1
Data Logs
Binary
Offset
H 0
2 H
2 H+2
4 H+4
4 H+8
4 H+12
4 H+16
4 H+20
2 H+24