Sysprofile - Novatel WAAS G-III User Manual

Commands

4.4.27 SYSPROFILE

The command response for this command contains the system profile information.
Valid States:
Valid Modes:
Acceptable Ports:
Syntax:
SYSPROFILE
Command Response Format:
<INFO:
SYSPROFILE:<MOP SW Identifier String >,<MOP SW Version String>,<MOP
SW Compile Date String>,<MOP SW Compile Time String>,<MOP SW Info
Tag String>,<Num Entities>
SYSPROFILE:<CARD TYPE>,<SLOT ID>,<MODULE ID>,<PSN String>,<HW
Version String>,<APP SW Version String>,<PBC SW Version String>,<SBC
SW Version String>,<FPGA Version String>,<APP SW Compile Date
String>,<APP SW Compile Time String>,<APP SW Info Tag String>,<PBC
SW Info Tag String>,<SBC SW Info Tag String>
...

The command response of the SYSPROFILE command contains multiple lines in ASCII
format. Each line begins with the new line delimiter CR+NL (0x0D,0x0A).
The command response of the SYSPROFILE command ends with an empty line, i.e., CR+NL
(0x0D,0x0A).
Example:
SYSPROFILE
<INFO:
SYSPROFILE:"MOPSW","AW3MM0000RN0000","May 23 2012","17:14:07","",5
SYSPROFILE:1,7,0,"DJV11100008","G3IOM-1.00","AW3IA0000RN0000",
"AG3IB0000RB0000","","","May 23 2012","00:04:12","","",""
SYSPROFILE:3,4,0,"DKF11180012","G3RFCC13-1.00","","","",
"G3RFCCFPGA-7","","","","",""
SYSPROFILE:4,4,1,"DKE11120011","G3RFDCG3-1.00","","","","","","",
"","",""
SYSPROFILE:2,2,0,"DJJ10460006","G3DSPC-1.00","AW3DA0000RN0000",
"AG3DB0000RB0000","AG3NA0000RN0000","G3DSPCFPGA-10","May 23 2012",
"00:05:18","","",""
SYSPROFILE:2,2,1,"DJJ10460006","G3DSPC-1.00","AW3DA0000RN0000",
"AG3DB0000RB0000","AG3NA0000RN00000","G3DSPCFPGA-10","May 23 2012",
"00:05:18","","",""
WAAS G-III Reference Receiver User Manual Rev 1
Configuration, Maintenance
Normal, Failed
Maintenance
Chapter 4
77