Operation
3.4
Status Display
The G-III Reference Receiver includes a display on the front panel that shows status information for the
receiver.
3.4.1
Adjusting the contrast
Adjusting the contrast of the Status display can improve the readability of the display if there are changes in
room lighting or viewing angle.
To change the contrast of the display, use the Contrast Up (
the right of the Status display.
3.4.2
Operation
There are two pages of information available on the Status display. The layout of the information on these
pages is shown in Figure 7 and Figure 8 on page 30.
To change between the two pages of information, press the Next Page (
Status display.
The LCD display turns off when the buttons on the front panel have not been pressed for two minutes. To turn
the display on, press any of the three front display buttons (
WAAS G-III Reference Receiver User Manual Rev 1
Figure 6: LCD Status Display
LCD display
Contrast Up
Contrast Down
Next Page
) or Contrast Down (
) button located to the right of the
,
or
).
Chapter 3
) buttons located to
29