Novatel WAAS G-III User Manual page 48

Chapter 4
Valid States:
Valid Modes:
Acceptable Ports:
Syntax:
ASSIGN svChan [state] [prn [Doppler window]]
Example:
ASSIGN 0 29 0 500
ASSIGN 2 idle
ASSIGN 12 auto
ASSIGN 20 120
Field Field Name
1 svChan
2 state
3 PRN
a
4
Doppler
b
5
window
a. If a Doppler is not specified, the receiver uses a default of 0 Hz.
b. If a Doppler window is not specified, the receiver uses a default of 5000 Hz.
48
Operational
Normal
Data
Description
SV channel
The desired SV channel state.
Idle sets the SV channel to not track any satellites.
Active sets the SV channel to active.
Auto sets the receiver to automatically assign PRN
codes to channels.
If a value is not given, the default of ACTIVE is used.
[Optional]
Satellite PRN
[Optional]
This value is required if you set the state field to Active.
This field must be left blank if you set the state field to
Auto or Idle.
Doppler (Hz)
[Optional]
Satellite motion, receiver antenna motion, and
receiver clock frequency error must be included in the
calculation of Doppler frequency.
Doppler window (Hz)
[Optional]
This is a ± value. For example, enter 500 for ±500 Hz.
WAAS G-III Reference Receiver User Manual Rev 1
Commands
Range Precision
0-17 (GPS)
Int
18-33 (SBAS)
idle
auto N/A
active
1-63 (GPS)
Int
120-158 (SBAS)
-5000 to 5000 Int
0 to 5000 Int