Unlog - Novatel WAAS G-III User Manual

Commands

4.4.32 UNLOG

This command removes a specific log request from the system.
Valid States:
Valid Modes:
Acceptable Ports:
Syntax:
UNLOG [port] message
Example:
UNLOG rangeb
UNLOG ICOM2 cardstatusb
Field Field Name
1 port
2 message
WAAS G-III Reference Receiver User Manual Rev 1
Configuration, Operational, Maintenance
Normal, Failed
Data
Description
The communications port used to output the data.
If a port is not specified, the command is applied to
the port the command was received on.
[Optional]
Message type
Chapter 4
Range Precision
ICOM1
N/A
ICOM2
See Table 24
Message Type N/A
on Page 61
83